Check the named application. This is a general Ford appendix and may describe vehicles other than Mustang. Model and year tables take precedence over the collection filename. Any emissions standards are historical source material.
With Electronic Inst.Cluster | |
1990-92 | Maintenance Service Reminder Reset - Procedure 2 |
Thunderbird | |
1989-92 | Maintenance Service Reminder Reset - Procedure 3 |
MAINTENANCE SERVICE REMINDER (VMM) > MAINTENANCE SERVICE REMINDER
RESET - PROCEDURE 1
NOTE: For models with Standard Instrument Cluster.
1. The SERVICE light will come on approximately every 7500 miles, indicating routine service is required. The light will remain on for 3 minutes after vehicle is started.
2. To cancel the message and reset SERVICE light on 1990 models, depress and hold SERVICE RESET button until 3 beeps are sounded. This will verify that reminder light has been reset. SERVICE RESET button is located in VMM unit, in center of overhead console.
3. To cancel the message and reset SERVICE light on 1991-92 models, insert a small diameter shank into hole centered directly above VMM display lights, and press switch once.
MAINTENANCE SERVICE REMINDER (VMM) > MAINTENANCE SERVICE REMINDER
RESET - PROCEDURE 2
NOTE: For models with Electronic Instrument Cluster.
1. SERVICE INTERVAL will be displayed on system scanner every 7500 miles, indicating that routine service is due. At 7500 miles, the message will remain on for 3 minutes after vehicle is started.
2. To cancel message and reset service interval on 1990 models, press and hold ODO SEL and TRIP RESET buttons until 3 beeps are heard. Buttons are located on speed alarm keyboard.
3. To cancel message and reset service interval on 1991-92 models, press and hold SERV button until 3 tones are heard. SERV button is located on speed alarm keyboard.
MAINTENANCE SERVICE REMINDER (VMM) > MAINTENANCE SERVICE REMINDER
RESET - PROCEDURE 3
1. Turn ignition switch to ON position. Within 16 seconds of turning ignition on, insert small diameter shank into reset switch hole, and firmly push in switch. Reset switch hole is located on left side of VMM panel.
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.