Yes | GO to A2 |
|---|---|
No | To diagnose no communication with the RCM, REFER to: Communications Network (418-00 Module Communications Network, Diagnosis and Testing). |
A2 CHECK THE OCSM (OCCUPANT CLASSIFICATION SYSTEM MODULE) CONTINUOUS MEMORY DIAGNOSTIC TROUBLE CODES (CMDTCS)
Using a diagnostic scan tool, perform OCSM self-test. Using a diagnostic scan tool, clear OCSM Diagnostic Trouble Codes (DTCs). Wait 10 seconds. Using a diagnostic scan tool, perform OCSM self-test.
Is DTC U0151:00 retrieved again?
Yes | GO to A3 |
|---|---|
No | The system is operating correctly at this time. The DTC may have been set due to high network traffic or an intermittent fault condition. |
A3 RETRIEVE THE RECORDED DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE RCM (RESTRAINTS CONTROL MODULE) SELF-TEST
Using a diagnostic scan tool, perform RCM self-test.
Is DTC U3003:16 or U3003:17 recorded?
Yes | REFER to: Pinpoint Test - DTC: AJ (501-20B Supplemental Restraint System, Diagnosis and Testing). |
|---|---|
No | GO to A4 |
A4 RETRIEVE THE RECORDED DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE OCSM (OCCUPANT CLASSIFICATION SYSTEM MODULE) SELF-TEST
Using a diagnostic scan tool, perform OCSM self-test. Check the recorded Diagnostic Trouble Codes (DTCs) from the OCSM self-test.
Is DTC U3003:16 or U3003:17 recorded?
Yes | REFER to: Pinpoint Test - DTC: AJ (501-20B Supplemental Restraint System, Diagnosis and Testing). |
|---|---|
No | GO to A5 |
A5 CHECK FOR DTC (DIAGNOSTIC TROUBLE CODE) U0151:00 SET IN OTHER MODULES
Ignition ON. Using a diagnostic scan tool, perform self-test for all modules.
Is DTC U0151:00 set in the ABS module or in the BCM?
Yes CHECK OASIS for any applicable Technical Service Bulletins (TSBs). If a TSB exists for
this concern, DISCONTINUE this test and FOLLOW TSB instructions. If no Technical
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.