Condition | Possible Sources | Actions |
|---|---|---|
General Procedures). |
Pinpoint Test(s)
P0532, P0533
Refer to Wiring Diagrams Cell 54 for schematic and connector information.
Normal operation and Fault Conditions
The A/C pressure transducer receives a ground from the PCM. A 5-volt reference voltage is supplied to the A/C pressure transducer from the PCM. The A/C pressure transducer then sends a voltage to the PCM to indicate the A/C pressure.
DTC Fault Trigger Conditions
DTC | Description | Fault Trigger Conditions |
P0532 A/C Refrigerant Pressure Sensor "A" Circuit Low | This DTC sets if the feedback voltage is less than 0.26 volt for at least 2 seconds and the ambient air temperature is greater than 0°C (32°F). | |
P0533 A/C Refrigerant Pressure Sensor "A" Circuit High | This DTC sets if the feedback voltage is greater than 4.95 volts for at least 2 seconds and the ambient air temperature is greater than 0°C (32°F). |
Possible Sources
Wiring, terminals or connectors A/C pressure transducer PCM
Visual Inspection and Diagnostic Pre-checks
Inspect for loose or corroded PCM and A/C pressure transducer connections.
PINPOINT TEST A : P0532, P0533
NOTICE: Use the correct probe adapter(s) when making measurements. Failure to use the correct probe adapter(s) may damage the connector.
A1 COMPARE THE PCM (POWERTRAIN CONTROL MODULE) PRESSURE SENSOR (ACP_PRESS) PID (PARAMETER IDENTIFICATION) WITH THE MANIFOLD GAUGE SET READINGS
Allow the A/C system to stabilize to the outside ambient temperature. Ignition ON. Using a diagnostic scan tool, view PCM Parameter Identifications (PIDs). With the manifold gauge set connected, compare the pressure readings of the manifold gauge set and the PCM ACP_PRESS PID.
Are the pressure values of the manifold gauge set and the ACP_PRESS PCM PID within ± 103 kPa (15 psi)?
Yes | IGNORE the Diagnostic Trouble Codes (DTCs). REFER to the Symptom Chart in this section. |
|---|
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.