Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C205-3 | Ground | |
C205-6 | Ground |
Is any voltage present?
Yes | REPAIR the circuit in question. |
|---|---|
No | GO to A3 |
A3 CHECK THE DIM UP AND DIM DOWN CIRCUITS FOR AN OPEN
Ignition OFF. Disconnect BCM CB2280B. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C205-3 | C2280B-3 | |
C205-6 | C2280B-7 |
Is the resistance less than 3 ohms?
Yes | GO to A4 |
|---|---|
No | REPAIR the circuit in question. |
A4 CHECK THE DIM UP AND DIM DOWN CIRCUITS FOR A SHORT TO GROUND
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C205-3 | Ground | |
C205-6 | Ground |
Are the resistances greater than 10,000 ohms?
Yes | GO to A5 |
|---|---|
No | REPAIR the circuit in question. |
A5 CHECK THE DIM UP AND DIM DOWN CIRUCITS FOR A SHORT TOGETHER
Source reference 3843
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.