MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Instrumentation and Warning Systems

Instrument Panel Cluster (IPC) - System Operation and Component Description

413-01 Instrumentation, Message Center and Warning Chimes

2016 MustangReference 3,876 / 6,619HTML edition
← Chapter contentsProcedure contents

display message from the GWM over the HS-CAN3. The GWM receives the vacuum boost display message from the PCM over the HS-CAN1.

ICM Gauges

Engine Oil Pressure

The engine oil pressure gauge is an analog gauge. The ICM receives the oil pressure warning indicator request from the PCM over the HS-CAN1.

Engine Oil Temperature

The engine oil temperature gauge is an analog gauge. The ICM receives the engine oil temperature message from the PCM over the HS-CAN1.

Vacuum Boost Gauge

The vacuum boost gauge is an analog gauge. The ICM receives the vacuum-boost display message from the PCM over the HS-CAN1.

Indicators

ABS Warning

The IPC receives the ABS warning indicator request message from the GWM over the HS-CAN3. The GWM receives the ABS warning indicator request message from the ABS module over the HS-CAN2. If a fault condition exists in the ABS, the ABS module sends the ABS warning indicator request message to either flash or illuminate the ABS warning indicator.

Refer to ABS/Brake/Stability-Traction Control System Indication description for information on the conditions when the ABS warning indicator is turned on

ABS/Brake/Stability-Traction Control System

The brake/stability-traction control system indication is controlled almost entirely by the ABS module. The ABS module can illuminate multiple indicators for various fault conditions. The following table provides a summary of the basic fault conditions and the indicators that are illuminated for each condition.

NOTE: Refer to the Normal Operation and Fault Condition description before each brake/stability-traction control system indicator Pinpoint Test (PPT) for the IPC default action for network/missing message conditions.

Event/Fault Condition

ABS Warning Indicator

Status

Brake Warning Indicator Status

Stability-Traction Control Indicator

Status

Stability-Traction Control Disabled Indicator Status

Stable driving (no control events)

Off

Off

Off

On or off based on driver request

Parking brake applied

Off

On

Off

Off

Low brake fluid level or brake fluid level input concern

Off

On

Off

Off

Stability-traction control event

Off

Off

Flashing

On or off based on driver request

Stability-traction control disabled by driver

Off

Off

Off

On

Single wheel speed sensor faults

On

Off

On

Off

2 or 3 wheel speed sensor faults

On

On

On

Off

Source reference 3876

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.