Network Message Chart
Module Network Input Messages - IPC
Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
Adaptive cruise control warning request | CCM | Input used to control the adaptive cruise control warning chime. |
Brake pedal applied | PCM | Input used to control the PRNDL not in park warning chime. |
Cross traffic alert left status | SODL | Input used to control the BLIS®/CTA warning chime. |
Cross traffic alert right status | SODR | Input used to control the BLIS®/CTA warning chime. |
Cruise control status | PCM | Input used to control the adaptive cruise control warning chime. |
Driver door ajar status | BCM | Input used to control the igntion-engine on warning chime and the PRNDL not in park warning chime. |
Driver safety belt buckle status | RCM | Input used to control the safety belt warning chime and the Belt-Minder®. |
Engine status | PCM | Input used to control the ignition-engine on warning chime. |
Forward collision chime request | CCM | Input used to control the forward collision warning chime. |
Front passenger detect status | RCM | Input used to control the Belt-Minder®. |
Gear lever position | PCM | Input used to control the Belt-Minder®. Reverse input on automatic transmissions used for the backup chime (Japan only). |
Headlamp On warning chime | BCM | Input used to control the headlamp on warning chime. |
Ignition status | BCM | Input used for the following: To provide ignition RUN, START and ACC states. To control the PRNDL not in park warning chime. |
Key-in-ignition indicator status | BCM | Input used to control the key-in-ignition warning chime. |
Left turn lamp request | BCM | Input used to control the turn signal-hazard tick-tock tone chime. |
Memory feedback request | DSM | Input used to control the memory feedback confirmation chime. |
Parking aid chime request | PAM | Input used to control the parking aid chime. |
Parking brake chime request | BCM | Input used to control the parking brake warning chime. |
Passenger safety belt buckle status | RCM | Input used to control the Belt-Minder®. |
Perimeter alarm chime request | BCM | Input used to control the perimeter alarm chime. |
Reverse gear state | PCM | Reverse input on manual transmissions used for the backup chime (Japan only). |
Right turn lamp request | BCM | Input used to control the turn signal-hazard tick-tock tone chime. |
Side obstacle sensor status-left | SODL | Input used to control the BLIS®/CTA warning chime. |
Side obstacle sensor status-right | SODR | Input used to control the BLIS®/CTA warning chime. |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.