No | The system is operating correctly at this time. The concern may have been caused by module connections. ADDRESS the root cause of any connector or pin issues. |
|---|
The FCDIM Is Inoperative Or Does Not Operate Correctly
Normal Operation and Fault Conditions
REFER to: Information and Entertainment System - System Operation and Component Description (415-00A Information and Entertainment System - General Information - Vehicles With: AM/FM/CD/SYNC, Description and Operation). See FCDIM.
Possible Source
FCDIM
PINPOINT TEST AA : THE FCDIM (FRONT CONTROL/DISPLAY INTERFACE MODULE) IS
INOPERATIVE OR DOES NOT OPERATE CORRECTLY
AA1 CHECK THE FCIM (FRONT CONTROLS INTERFACE MODULE) OPERATION
Ignition ON. Turn the audio system on. Press each FCIM button and check for proper operation.
Does each FCIM button perform the correct operation?
Yes | GO to AA2 |
|---|---|
No | GO to Pinpoint Test Z |
AA2 VERIFY THAT THE FCDIM (FRONT CONTROL/DISPLAY INTERFACE MODULE) PASSES THE NETWORK TEST
Using a diagnostic scan tool, perform the network test.
Did the FCDIM pass the network test?
Yes | GO to AA3 |
|---|---|
No | REFER to: Communications Network (418-00 Module Communications Network) . See The FCDIM Does Not Respond To The Diagnostic Scan Tool. |
AA3 OBSERVE THE FCDIM (FRONT CONTROL/DISPLAY INTERFACE MODULE) DISPLAY
Observe the FCDIM display while carrying out various operations using the FCIM controls.
Is the FCDIM screen completely inoperative or blank?
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.