Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C9063-1 | Ground | |
C9063-3 | Ground |
Are the resistances greater than 10,000 ohms?
Yes | GO to L4 |
|---|---|
No | REPAIR the circuit in question. |
L4 CHECK THE AUDIO CIRCUITS TO THE LHF (LEFT-HAND FRONT) A-PILLAR TWEETER SPEAKER FOR AN OPEN
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C9063-1 | C2385C-8 | |
C9063-3 | C2385C-9 |
Are the resistances less than 3 ohms?
Yes | GO to L5 |
|---|---|
No | REPAIR the circuit in question. |
L5 CHECK THE AUDIO CIRCUITS TO THE LHF (LEFT-HAND FRONT) A-PILLAR TWEETER SPEAKER FOR A SHORT TOGETHER
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C9063-1 | C9063-3 |
Is the resistance greater than 10,000 ohms?
Yes | GO to L6 |
|---|---|
No | REPAIR the circuit in question. |
L6 CHECK THE LH (LEFT-HAND) AUDIO SIGNAL FROM THE ACM (AUDIO FRONT CONTROL MODULE) TO THE AUDIO DSP (AUDIO DIGITAL SIGNAL PROCESSING MODULE) MODULE
Ignition OFF. Connect: Audio DSP Module C2385C. Disconnect: Audio DSP Module C2385A. Ignition ON. Operate the audio system in AM/ FM mode.
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.