Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C613-1 | C613-3 |
Is the resistance greater than 10,000 ohms?
Yes | GO to O6 |
|---|---|
No | REPAIR the circuit in question. |
O6 CHECK THE RH (RIGHT-HAND) AUDIO SIGNAL FROM THE ACM (AUDIO FRONT CONTROL MODULE) TO THE AUDIO DSP (AUDIO DIGITAL SIGNAL PROCESSING MODULE) MODULE
Ignition OFF. Connect: Audio DSP Module C2385C. Disconnect: Audio DSP Module C2385A. Ignition ON. Operate the audio system in AM/ FM mode. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2385A-3 | C2385A-4 |
Is a fluctuating AC voltage present?
Yes | GO to O12 |
|---|---|
No | GO to O7 |
O7 CHECK THE RH (RIGHT-HAND) AUDIO SIGNAL FROM THE ACM (AUDIO FRONT CONTROL MODULE) TO THE AUDIO DSP (AUDIO DIGITAL SIGNAL PROCESSING MODULE) MODULE FOR A SHORT TO VOLTAGE
Ignition OFF. Disconnect: ACM C240A. Ignition ON. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2385A-3 | Ground | |
C2385A-4 | Ground |
Is any voltage present?
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.