Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C4109A-7 | Ground | |
C4109A-8 | Ground |
Are the resistances greater than 10,000 ohms?
Yes | GO to S10 |
|---|---|
No | REPAIR the circuit in question. |
S10 CHECK THE AUDIO CIRCUITS TO THE SUBWOOFER AMPLIFIER FOR AN OPEN
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C4109A-7 | C2385B-1 | |
C4109A-8 | C2385B-2 |
Are the resistances less than 3 ohms?
Yes | GO to S11 |
|---|---|
No | REPAIR the circuit in question. |
S11 CHECK THE AUDIO CIRCUITS TO THE SUBWOOFER AMPLIFIER FOR A SHORT TOGETHER
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C4109A-7 | C4109A-8 |
Is the resistance greater than 10,000 ohms?
Yes | GO to S12 |
|---|---|
No | REPAIR the circuit in question. |
S12 CHECK FOR CORRECT AUDIO DSP (AUDIO DIGITAL SIGNAL PROCESSING MODULE) MODULE OPERATION
Ignition OFF. Disconnect and inspect all the audio DSP module connectors. Repair:
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.