DTC Fault Trigger Conditions
Description | Fault Trigger Conditions | DTC Type |
|---|---|---|
U0159:00 Lost Communication With Parking Assist Control Module "A": No Sub Type Information | Set by the APIM when network messages are missing from the PAM for more than 5 seconds with the ignition in RUN. | Continuous |
DTC
Possible Source
PAM
PINPOINT TEST AQ : U0159:00
AQ1 VERIFY THE CUSTOMER'S CONCERN
Ignition ON. Verify if there is an observable symptom present.
Is an observable symptom present?
Yes | GO to AQ2 |
|---|---|
No | The system is operating correctly at this time. The DTC may have been set due to high network traffic or an intermittent fault condition. |
AQ2 RECHECK FOR DTC (DIAGNOSTIC TROUBLE CODE) U0159:00
Ignition ON. Using a diagnostic scan tool, clear all Continuous Memory Diagnostic Trouble Codes (CMDTCs). Ignition OFF. Ignition ON. Wait at least 10 seconds. Using a diagnostic scan tool, retrieve all Continuous Memory Diagnostic Trouble Codes (CMDTCs).
Is DTC U0159:00 set in the APIM?
Yes | GO to AQ3 |
|---|---|
No | The system is operating correctly at this time. The DTC may have been set due to high network traffic or an intermittent fault condition. |
AQ3 CHECK THE BCM (BODY CONTROL MODULE) FOR BATTERY VOLTAGE OUT-OF-RANGE DIAGNOSTIC TROUBLE CODES (DTCS)
Using a diagnostic scan tool, perform the BCM self-test.
Are any low or high voltage Diagnostic Trouble Codes (DTCs) recorded in the BCM?
Yes • For DTC U3006:16,
REFER to: Body Control Module (BCM) (419-10 Multifunction Electronic Modules, Diagnosis and Testing). See U3006:16.
• For DTC U3006:17,
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.