U0238:00
Normal Operation and Fault Conditions
REFER to: Information and Entertainment System (415-00B) . See Network Message Chart.
DTC Fault Trigger Conditions
Description | Fault Trigger Conditions | DTC Type |
|---|---|---|
U0238:00 Lost Communication With Digital Audio Control Module "D": No Sub Type Information | Set by the ACM and APIM when network messages are missing from the audio DSP module for more than 5 seconds with the ignition in RUN. | Continuous |
DTC
Possible Source
Audio DSP module
PINPOINT TEST AT : U0238:00
AT1 VERIFY THE CUSTOMER'S CONCERN
Ignition ON. Verify there is an observable symptom present.
Is an observable symptom present?
Yes | GO to AT2 |
|---|---|
No | The system is operating correctly at this time. The DTC may have been set due to high network traffic or an intermittent fault condition. |
AT2 RECHECK FOR DTC (DIAGNOSTIC TROUBLE CODE) U0238:00
Ignition ON. Using a diagnostic scan tool, clear all Continuous Memory Diagnostic Trouble Codes (CMDTCs). Ignition OFF. Ignition ON. Wait at least 10 seconds. Using a diagnostic scan tool, retrieve all Continuous Memory Diagnostic Trouble Codes (CMDTCs).
Is DTC U0238:00 set in the ACM or APIM?
Yes | GO to AT3 |
|---|---|
No | The system is operating correctly at this time. The DTC may have been set due to high network traffic or an intermittent fault condition. |
AT3 CHECK FOR BATTERY VOLTAGE OUT-OF-RANGE DIAGNOSTIC TROUBLE CODES (DTCS)
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.