Bezel Diagnostics
Check
1. WARNING: Before beginning any service procedure in this section, refer to Health and Safety
Precautions in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.
Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
NOTE: If there is a concern with one of the following components and Bezel Diagnostics cannot be accessed, obtain the module part number by referencing the label attached to the module.
Inoperative (blank or does not power on) FDIM Inoperative FCIM Inoperative steering wheel switch (for vehicles without a CD player)
Refer to appropriate section in Group 415 to diagnose the inoperative component.
2. Ignition ON.
3. Operate the audio system in AM/ FM mode.
• For vehicles with a CD player, press and hold the EJECT button, and within 1 second, press and hold the SEEK UP button. If supported, the Speaker Walk-Around Test will begin, and the display will indicate each speaker as it is tested.
• For vehicles without a CD player, simultaneously press and hold the steering wheel SEEK UP switch and FCIM TUNE UP button. If supported, the Speaker Walk-Around Test will begin, and the display will indicate each speaker as it is tested.
4. Once the Speaker Walk-Around Test (All Speaker Test) is complete, the following information is available:
Menu | Submenu |
APIM Diagnostics | Part Numbers |
Software Versions | |
Configuration Status | |
Location Information | |
Tones Test | |
Touchscreen Activation Test | |
Display Test Pattern | |
RGB Pixel Test | |
IVSU Versions | |
Exit Diagnostics | |
AHU Diagnostics (AHU refers to the ACM) | AHU Part Numbers (also displays SIRIUS ESN) |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.