Vehicle Certification Label Location

Vehicle applicability: This diagnostic supplement covers multiple Ford vehicles and engines. Follow the application named in the source below. Some references apply to vehicles other than Mustang.

Description and Operation 1-9

Vehicle Certification Label

Engine Calibration Information (Truck)

Typical Truck Vehicle Certification Label

The vehicle certification label is typically located on the LH door or door post pillar.

Engine Calibration Code

2016 Model Year Example

Engine Calibration Code: GB7 1 4D 0 A 00

G MODEL YEAR — Model year in which the calibration was first introduced. G equals 2016

B7 VEHICLE CODE — Vehicle line description. B7 equals Expedition 1 TRANSMISSION CODE — Transmission description. 1 equals automatic, 2 equals manual 4D UNIQUE CALIBRATION — Identifications are assigned to cover similar vehicles to differentiate between tires, drive configurations, final drive ratios and other calibration-significant factors. 0 FLEET CODE — Describes which fleet the vehicle belongs to. 0 equals Certification (U.S. 4K) A CERTIFICATION REGION — Lead region code where multiple regions are included in one calibration. A equals U.S. Federal 00 REVISION LEVEL — Revision level of the calibration. 00 equals Job 1 production or initial calibration. (Not printed on vehicle certification label)

Original table alignment retained · Scroll horizontally if needed

2016 Powertrain Control/Emissions Diagnosis, Gasoline Engines, 3/2015

Source reference 4619

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.