ETC System Failure Mode and Effects Management: — 2016 workshop reference 4698

Vehicle applicability: This diagnostic supplement covers multiple Ford vehicles and engines. Follow the application named in the source below. Some references apply to vehicles other than Mustang.

1-88 Description and Operation

Torque Based Electronic Throttle Control (ETC)

ETC System Failure Mode and Effects Management: (Continued)

Effect	Failure Mode
	applied. When the brake pedal is released, the PCM slowly increases the APP signal to a fixed value. The powertrain malfunction indicator (wrench) illuminates, but the MIL does not illuminate in this mode. An APP or BPP sensor related DTC sets.
RPM Guard With Pedal Follower	In this mode, torque control is disabled due to the loss of a critical sensor or PCM concern. The throttle is controlled in pedal follower mode as a function of the APP sensor input only. A maximum allowed RPM is determined based on the position of the accelerator pedal (RPM Guard). If the actual RPM exceeds this limit, spark and fuel are used to bring the RPM below the limit. The powertrain malfunction indicator (wrench) and the MIL illuminate in this mode and a DTC for an ETC related component sets. The EGR and VCT outputs are set to default values and cruise control is disabled.
RPM Guard With Default Throttle	In this mode, the throttle plate control is disabled due to the loss of both TP sensor inputs, loss of throttle plate control, stuck throttle plate, significant processor concerns, or other major electronic throttle body concern. The spring returns the throttle plate to the default (limp home) position. A maximum allowed RPM is determined based on the position of the accelerator pedal (RPM Guard). If the actual RPM exceeds this limit, spark and fuel are used to bring the RPM below the limit. The powertrain malfunction indicator (wrench) and the MIL illuminate in this mode and a DTC for an ETC related component sets. The EGR and VCT outputs are set to default values and cruise control is disabled.

Effect

Failure Mode

applied. When the brake pedal is released, the PCM slowly increases the APP signal to a fixed value. The powertrain malfunction indicator (wrench) illuminates, but the MIL does not illuminate in this mode. An APP or BPP sensor related DTC sets.

RPM Guard With Pedal Follower

In this mode, torque control is disabled due to the loss of a critical sensor or PCM concern. The throttle is controlled in pedal follower mode as a function of the APP sensor input only. A maximum allowed RPM is determined based on the position of the accelerator pedal (RPM Guard). If the actual RPM exceeds this limit, spark and fuel are used to bring the RPM below the limit. The powertrain malfunction indicator (wrench) and the MIL illuminate in this mode and a DTC for an ETC related component sets. The EGR and VCT outputs are set to default values and cruise control is disabled.

RPM Guard With Default Throttle

In this mode, the throttle plate control is disabled due to the loss of both TP sensor inputs, loss of throttle plate control, stuck throttle plate, significant processor concerns, or other major electronic throttle body concern. The spring returns the throttle plate to the default (limp home) position. A maximum allowed RPM is determined based on the position of the accelerator pedal (RPM Guard). If the actual RPM exceeds this limit, spark and fuel are used to bring the RPM below the limit. The powertrain malfunction indicator (wrench) and the MIL illuminate in this mode and a DTC for an ETC related component sets. The EGR and VCT outputs are set to default values

and cruise control is disabled.

2016 Powertrain Control/Emissions Diagnosis, Gasoline Engines, 3/2015

Source reference 4698

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.