Vehicle applicability: This diagnostic supplement covers multiple Ford vehicles and engines. Follow the application named in the source below. Some references apply to vehicles other than Mustang.
2-4 Diagnostic Methods
Scan Tool Setup And Functionality
Scan Tool Setup And Functionality
Connect the scan tool to the data link connector (DLC) for communication with the vehicle.
The DLC is located on the driver side of the vehicle under the steering column. It is attached to the instrument panel and accessible from the driver seat.
The DLC is rectangular in design and capable of accommodating up to 16 pins. The connector has keying features to allow easy connection.
The required scan tool functions are described below:
— monitor, record, and playback of parameter identification (PID) — freeze frame PID data — diagnostic test modes; self-test, clear diagnostic trouble codes (DTCs) — output state control (OSC) — resetting keep alive memory (KAM) — diagnostic monitoring test results (mode 6) for on board diagnostic (OBD) monitors — on board system readiness (OBD monitor completion status)
Some of these functions are described in this section. Refer to the scan tool manufacturer's instruction manual for specific information on scan tool setup and operation.
International Standards Organization (ISO) 14229 DTC Descriptions
The ISO 14229 DTC is a set of common requirements for diagnostic systems. The scan tool displays a failure type and a status type with the DTC. The types display additional information on the scan tool for the condition that set the DTC. For a list of failure type descriptions, refer to Section 1, Powertrain Control Software, International Standards Organization (ISO) 14229 Diagnostic Trouble Code (DTC) Descriptions.
2016 Powertrain Control/Emissions Diagnosis, Gasoline Engines, 3/2015
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.