Vehicle applicability: This diagnostic supplement covers multiple Ford vehicles and engines. Follow the application named in the source below. Some references apply to vehicles other than Mustang.
DF4 CHECK FOR CORRECT PCM OPERATION
• Visually inspect for:
◾ pushed out pins ◾ corrosion
• Connect all the PCM connectors and make sure they seat correctly.
• Carry out the PCM self-test.
• Verify the concern is still present.
Is the concern still present?
Yes | No |
|---|---|
INSTALL a new PCM. REFER to Section 2, Flash Electrically Erasable Programmable Read Only Memory (EEPROM), Programming the VID Block for a Replacement PCM. | The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector. |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.