MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Powertrain Control-Emissions Diagnosis

H: Fuel Control H: Introduction

Powertrain Control-Emissions Diagnosis

Ford gasoline diagnostic supplementReference 5,120 / 6,619HTML edition
← Chapter contentsProcedure contents

Vehicle applicability: This diagnostic supplement covers multiple Ford vehicles and engines. Follow the application named in the source below. Some references apply to vehicles other than Mustang.

2016 PCED Gasoline Engines SECTION 5: Pinpoint Tests

Procedure revision date: 11/23/2015

H: Fuel Control

H: Introduction

H1 CHECK FOR DTCS

Are DTCs P0171, P0172, P0174, P0175, P2195, P2196, P2197, P2198, P219A, P219B, P219C, P219D, P219E, P219F, P21A0, P21A1, P2270, P2271, P2272 or P2273 present?

Yes

No

For DTCs P2270, P2271, P2272 or P2273, GO to H3 .

For all others, GO to H2 .

RETURN to Section 3 , Symptom Charts for further direction.

H2 RICH OR LEAN SYSTEM DTCS

Note: All PIDs may not be available on all vehicles.

Note: Do not clear the DTCs or reset the keep alive memory (KAM).

• Access the PCM and record the ECT or ECT1 PID from the freeze frame data. The freeze frame data is used to recreate the concern.

• Carry out the PCM self-test.

Are any DTCs present other than the following: P0171, P0172, P0174, P0175, P2195, P2196, P2197, P2198, P219A, P219B, P219C, P219D, P219E, P219F, P21A0 or P21A1?

Yes

No

DISREGARD the current diagnostic trouble code (DTC) at this time. DIAGNOSE the next DTC. GO to Section 4, Diagnostic Trouble Code (DTC) Charts and Descriptions.

GO to H3 .

H3 CARRY OUT A VISUAL INSPECTION

• Ignition OFF.

• Check the air filter element and housing for blockage.

• Inspect the entire air intake system from the mass airflow (MAF) sensor to the intake manifold for leaks such as:

◾ hoses connecting to the MAF sensor assembly ◾ cracked or punctured intake air tube ◾ loose connections on the intake air tube at the air cleaner housing or throttle body ◾ hoses connecting to the throttle body ◾ obstructions, restrictions, or damage

• Check the throttle plate for obstructions or sludge.

• Inspect the entire length of all the vacuum hoses for:

◾ correct connections

Source reference 5120

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.