Vehicle applicability: This diagnostic supplement covers multiple Ford vehicles and engines. Follow the application named in the source below. Some references apply to vehicles other than Mustang.
Reference Values 6-99
3.5L TIVCT Edge
(Continued)
Inputs Component/PID Measured/PID Values Units Only Measured/PID KOEO Hot Idle 48 KM/H (30 89 KM/H (55 MPH) MPH) O2S21_ HO2S21 Sensor NO YES YES YES YES/NO READY O2S21_TR HO2S21 Sensor 0 0 0 0 Kohm O2S22 HO2S22 Sensor (I) switching (D) switching (D) switching (D) VOLTS RPM CKP Sensor 0 839.25 1581.25 1547 RPM SYNC PID NO YES YES YES YES/NO TP1 ETBTPS 4.10/17.64 4.31/13.72 4.24/14.90 3.97/20.39 VOLTS/% TP1_LRN_ ETBTPS 15.12 15.12 15.12 15.12 DEG TRIM TP2 ETBTPS 1.21/23.92 0.80/15.68 0.92/18.43 1.47/29.41 VOLTS/% TP2_LRN_ ETBTPS 7.75 7.75 7.75 7.75 DEG TRIM TP_MAXDIFF PID 0 0 0.06 -0.06 % VCTSYS PID OPEN LOOP CLOSED LOOP CLOSED LOOP CLOSED LOOP OPEN LOOP/ CLOSED LOOP VCT_EXH_ PID 0 0 41.50 39.37 DEG ACT1 VCT_EXH_ PID 0 0 41.50 39.25 DEG ACT2 VCT_EXH_ PID 0 0 0.56 0.68 DEG DIF1 VCT_EXH_ PID 0 0 0.50 0.93 DEG DIF2 VCT_INT_ PID 0 -0.18 -9.87 -25.87 DEG ACT1 VCT_INT_ PID 0 -0.06 -9.81 -26.87 DEG ACT2 VCT_INT_ PID 0 0.18 -0.06 1.81 DEG DIF1 VCT_INT_ PID 0 0.06 -0.18 2.31 DEG DIF2 VSS PID 0 0 48 km/h (30 MPH) 89 km/h (55 MPH) km/h / MPH
Original table alignment retained · Scroll horizontally if needed
Outputs Component/PID Measured/PID Values Units Only Measured/PID KOEO Hot Idle 48 KM/H (30 89 KM/H (55 MPH) MPH) CYL_1-6_ACCL PID (I) -1 TO +1 -1 TO +1 -1 TO +1 NUMERIC VALUE ETC [TAC_PCT] PID 9.41 2.74 5.88 14.11 % EVAP020C PID NO NO NO NO YES/NO EVAPCP EVAPCP Valve 0 15.06 0 26.52 % EVAPCV CANV Valve 0/OFF 0/OFF 0/OFF 0/OFF %/ON-OFF EVAPSOAK PID YES YES YES YES YES/NO
Original table alignment retained · Scroll horizontally if needed
2016 Powertrain Control/Emissions Diagnosis, Gasoline Engines, 3/2015
Source reference 5453
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.