MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Lighting

Turn Signal and Hazard Lamps

417-01 Exterior Lighting

2016 MustangReference 5,742 / 6,619HTML edition
← Chapter contentsProcedure contents

Activate the hazard flasher lamp function. Measure:

Click to display connectors

LH Rear Turn Lamp

Positive Lead

Measurement / Action

Negative Lead

C412-3

Ground

Click to display connectors

RH Rear Turn Lamp

Positive Lead

Measurement / Action

Negative Lead

C415-3

Ground

Does the voltage alternate from 0 to greater than 11 volts?

Yes

INSTALL a new rear lamp assembly. REFER to: Rear Lamp Assembly (417-01 Exterior Lighting, Removal and Installation).

No

GO to C13

C12 CHECK THE REAR TURN LAMP GROUND CIRCUIT FOR AN OPEN

Measure:

Click to display connectors

LH Rear Turn Lamp

Positive Lead

Measurement / Action

Negative Lead

C412-3

C412-4

Click to display connectors

RH Rear Turn Lamp

Positive Lead

Measurement / Action

Negative Lead

C415-3

C415-4

Does the voltage alternate from 0 to greater than 11 volts?

Yes

INSTALL a new rear lamp assembly. REFER to: Rear Lamp Assembly (417-01 Exterior Lighting, Removal and Installation).

No

REPAIR the circuit.

Source reference 5742

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.