Is the voltage greater than 11 volts?
Yes | GO to C3 |
|---|---|
No | GO to C4 |
C3 CHECK THE PONY PROJECTION LAMP GROUND CIRCUIT
Measure:
Click to display connectors
LH Pony Projection Lamp
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C520-5 | C520-7 |
Click to display connectors
RH Pony Projection Lamp
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C626-5 | C626-7 |
Is the voltage greater than 11 volts?
Yes | INSTALL a new pony projection lamp. REFER to: Exterior Mirror (501-09 Rear View Mirrors, Removal and Installation). |
|---|---|
No | REPAIR the circuit. |
C4 CHECK THE PONY PROJECTION LAMP CIRCUIT FOR AN OPEN TO THE LAMP
Ignition OFF. Disconnect: BCM C2280C. Measure:
Click to display connectors
LH Pony Projection Lamp
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C520-5 | C2280C-26 |
Click to display connectors
RH Pony Projection Lamp
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.