Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C3513-2 | C2280D-14 |
Click to display connectors
Keyless Entry Rear Antenna
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C4378-1 | C2280D-16 | |
C4378-2 | C2280D-15 |
Click to display connectors
Driver Exterior Front Door Handle
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C543-2 | C2280D-13 | |
C543-3 | C2280D-28 |
Click to display connectors
Passenger Exterior Front Door Handle
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C634-2 | C2280D-12 | |
C634-3 | C2280D-29 |
Are the resistances less than 3 ohms?
Yes | INSTALL a new antenna in question. REFER to: Passive Anti-Theft System (PATS) Front Antenna (419-01B Passive Anti-Theft System (PATS), Removal and Installation). REFER to: Exterior Front Door Handle (501-14 Handles, Locks, Latches and Entry Systems, Removal and Installation). REFER to: Keyless Entry Rear Antenna (501-14 Handles, Locks, Latches and Entry Systems, Removal and Installation). TEST the system for normal operation. If the concern is still present, GO to A10 | |
|---|---|---|
No | REPAIR the circuit in question. | |
A10 CHECK FOR CORRECT BCM (BODY CONTROL MODULE) OPERATION
Disconnect and inspect all of the BCM connectors. Repair:
corrosion (install new connectors or terminals, clean module pins)
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.