Yes | GO to H3 |
|---|---|
No | REFER to: Communications Network (418-00 Module Communications Network) . |
H3 PERFORM THE SODL (SIDE OBSTACLE DETECTION CONTROL MODULE LH) AND SODR (SIDE OBSTACLE DETECTION CONTROL MODULE RH) SELF-TEST
Using a diagnostic scan tool, perform the SODL and SODR self-tests.
Are any non-network Diagnostic Trouble Codes (DTCs) present?
Yes | DIAGNOSE all non-network Diagnostic Trouble Codes (DTCs). REFER to the DTC chart in this section. |
|---|---|
No | GO to H4 |
H4 CHECK THE GWM (GATEWAY MODULE A) DIAGNOSTIC TROUBLE CODES (DTCS)
Using a diagnostic scan tool, check the GWM Continuous Memory Diagnostic Trouble Codes (CMDTCs).
Are any Diagnostic Trouble Codes (DTCs) recorded?
Yes | REFER to: Communications Network (418-00 Module Communications Network) . |
|---|---|
No | GO to H5 |
H5 CHECK FOR DTC (DIAGNOSTIC TROUBLE CODE) U0101 SET IN OTHER MODULES
Using a diagnostic scan tool, clear all Diagnostic Trouble Codes (DTCs) from all modules. Ignition OFF. Wait 10 seconds. Ignition ON. Wait 10 seconds. Retrieve the Continuous Memory Diagnostic Trouble Codes (CMDTCs) from all modules.
Is DTC U0101 set in any other module?
Yes | GO to H6 |
|---|---|
No | If there is an observable symptom, DIAGNOSE the observable symptom. If there is no observable symptom, the system is operating correctly at this time. The DTC may have been set due to high network traffic or an intermittent fault condition. |
H6 CHECK FOR CORRECT PCM (POWERTRAIN CONTROL MODULE) OPERATION
Ignition OFF. Disconnect and inspect all PCM connectors and related in-line connectors. Repair:
corrosion (install new connector or terminals – clean module pins) damaged or bent pins – install new terminals/pins pushed-out pins – install new pins as necessary
Reconnect the PCM connectors and related in-line connectors. Make sure they seat and latch correctly. Operate the system and determine if the concern is still present.
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.