MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Body & Paint

Active Grille Shutter

501-02 Front End Body Panels

2016 MustangReference 792 / 6,619HTML edition
← Chapter contentsProcedure contents

Is DTC DTC P05A7, U0046 or U0284 present?

Yes

GO to A2

No

For DTC P059F or P05A1, GO to A7 For all other PCM Diagnostic Trouble Codes (DTCs), Refer to the appropriate section in Group 303 for the procedure.

A2 CHECK THE VOLTAGE SUPPLY TO THE GRILLE SHUTTER ACTUATOR

Ignition OFF. Disconnect: Grille Shutter Actuator C1651. Ignition ON. Measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C1651-3

Ground

Is the voltage greater than 11 volts?

Yes

GO to A3

No

VERIFY BJB fuse 85 (15A) is OK. If OK, REPAIR the circuit. If not OK, REFER to the Wiring Diagrams manual to identify the cause of the circuit short.

A3 CHECK THE GRILLE SHUTTER ACTUATOR GROUND CIRCUIT FOR AN OPEN

Ignition OFF. Measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C1651-1

Ground

Is the resistance less than 3 ohms?

Yes

For DTC U0046 or U0284, GO to A4 For DTC P05A7, GO to A9

No

REPAIR the circuit.

A4 CHECK THE LIN (LOCAL INTERCONNECT NETWORK) CIRCUIT FOR AN OPEN

Ignition OFF. Disconnect: PCM C1551B. Measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C1651-2

C1551B-50

Source reference 792

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.