MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2015–2017 source collection · Additional coverage

Engine Cooling - Component Location

Engine Cooling - 3.7L Duratec (227kW 301PS)

Source configuration appliesSource reference 5,893HTML edition
← Chapter contentsManual collection

Ford Mustang

Service Manual: ENGINE COOLING - 3.7L DURATEC (227KW 301PS)

SPECIFICATIONS > SPECIFICATIONS

Lubricants, Fluids, Sealants and Adhesives

Name

Specification

Fill Capacity

Motorcraft® Orange Antifreeze/Coolant Concentrated (U.S.)VC-3-B (U.S.)

WSS-M97B44-D

11.1 qt (10.5L)

Motorcraft® Orange Antifreeze/Coolant Prediluted (U.S.)VC-3DIL-B (U.S.)

WSS-M97B44-D2

11.1qt (10.5L)

Motorcraft® Premium Cooling System Flush VC-1

ESR-M14P7-A

-

Cooling System Pressure

Complete cooling system maximum pressure

145 kPa (21 psi)

Pressure relief cap

145 kPa (21 psi)

Radiator pressure test (removed from the vehicle)

138 kPa (20 psi)

Thermostat Opening Temperatures

Starts to open

83.9°C-87.8°C (183°F-190°F)

Fully open

98.9°C (210°F)

DESCRIPTION AND OPERATION > ENGINE COOLING - COMPONENT LOCATION

NOTE: Coolant temperature will vary with ambient temperature and load. Temperatures shown are for ambient temperature of 38°C (100°F). Red arrows indicate a temperature over 90°C (194°F), Orange arrows indicate a temperature of approximately 90°C (194°F), Blue arrows indicate a temperature below 90°C (194°F).

Ford_Mustang_all_2015-2017.pdf · source reference 5893

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.