Fuel Pump Shut-off Feature
The event notification signal is a signal provided by the RCM to the Fuel Pump Control Module. Signal communication between the RCM and the Fuel Pump Control Module allows the PCM to shut-off the Fuel Pump.
Should the vehicle shut off after a collision due to this feature, the vehicle may be restarted by first turning the ignition to the OFF position and then turn the ignition to the ON position. In some instances the vehicle may not start the first time and may take one additional ignition cycle.
DIAGNOSIS AND TESTING > FUEL SYSTEM > SYMPTOM CHART(S) > SYMPTOM
CHART: FUEL SYSTEM
Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods for information regarding Ford-specific diagnostic practices.
NOTE: The following procedure diagnoses a slow to fill concern only. For all other concerns, refer to Refer to ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) .
DIAGNOSIS AND TESTING > FUEL SYSTEM > SYMPTOM CHART(S) > SYMPTOM
CHART
Condition | Possible Sources | Actions |
Slow to fill | Fuel tank filler pipe Fuel tank filler pipe vent tube, if equipped EVAP system Fuel tank inlet check valve (part of the fuel tank) Fuel level vent valve (part of the fuel tank) | Refer to GO to Pinpoint Test A |
All other fuel system concerns | Fuel system components | Refer to ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) . |
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.