Yes | For DTC P0830:11 GO to A26 For all BCM Diagnostic Trouble Codes (DTCs), REFER to the BCM DTC Chart in DTC Charts . |
|---|
No | GO to A5 |
|---|
A5 RETRIEVE PCM (POWERTRAIN CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)
Using a diagnostic scan tool, perform PCM self-test.
Are any PCM Diagnostic Trouble Codes (DTCs) other than P06E9 present?
Yes | REFER to the PCM DTC Chart in DTC Charts . |
|---|
No | With automatic transmission, GO to A6With manual transmission, GO to A11 |
|---|
A6 CHECK THE OPERATION OF THE STOPLAMPS
While observing the stoplamps, apply the brake pedal.
Do the stoplamps illuminate?
Yes | GO to A7 |
|---|
No | DIAGNOSE All the Stoplamps are inoperative. REFER to: Stoplamps . |
|---|
A7 CHECK THE BRAKE PEDAL POSITION (BOO1) PID (PARAMETER IDENTIFICATION)
Using a diagnostic scan tool, view PCM Parameter Identifications (PIDs).
Monitor the PCM B001 PID while applying the brake pedal.
Does the PID read On?
Yes | GO to A9 |
|---|
No | GO to A8 |
|---|
A8 CHECK THE BPP (BRAKE PEDAL POSITION) SWITCH CIRCUIT FOR VOLTAGE AT THE PCM (POWERTRAIN CONTROL MODULE)
Ignition OFF.
Disconnect PCM C1381B .
While applying the brake pedal, measure:
Positive Lead Measurement / Action Negative Lead
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.