The remote start is inoperative | Remote start feature not enabled Passive Key or battery PCM Wiring, terminals or connectors | REFER to: Locks, Latches and Entry Systems . |
The remote start has poor range performance | Passive key or battery After market systems High power devices TV/radio transmission towers | REFER to: Locks, Latches and Entry Systems . |
DIAGNOSIS AND TESTING > STARTING SYSTEM > PINPOINT TEST(S)
Engine Does Not Crank
Refer to Starting System for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Starting System - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC | Description | Fault Trigger Conditions |
P06E9 | Engine Starter Performance | The PCM sets this DTC when no engine rotation is detected during a crank event. |
P0830 | Clutch Pedal "A" Circuit | The PCM sets this DTC when the PCM receives vehicle speed input, indicating vehicle movement and does not detect the switching input from the clutch pedal position switch. |
P0830:11 | Clutch Pedal Switch "A" Circuit: Circuit Short To Ground | The BCM sets this DTC when a short to ground is detected on the clutch bottom of travel circuit during an on-demand self test. |
Possible Sources
Battery
Battery cables
IPC
Starter motor
BJB starter relay
Visual Inspection and Diagnostic Pre-checks
Inspect the run/start relay.
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.