Are any Diagnostic Trouble Codes (DTCs) recorded?
Yes | REFER to: Body Control Module (BCM) . |
|---|
No | GO to B5 |
|---|
B5 PERFORM THE PCM (POWERTRAIN CONTROL MODULE) SELF-TEST
Using a diagnostic scan tool, perform the PCM self-test.
Is DTC P0562 or DTC P0563 recorded?
Yes | REFER to DTC Chart: Powertrain Control Module (PCM) . |
|---|
No | GO to B6 |
|---|
NOTE: If new modules were installed prior to the DTC being set, the module configuration may be incorrectly set during the PMI, or the PMI may not have been carried out.
B6 RECHECK THE PCM (POWERTRAIN CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)
Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs).
Wait 10 seconds.
Repeat the PCM self-test.
Is DTC U0212 still present?
Yes | GO to B7 |
|---|
No | The system is operating correctly at this time. The DTC may have been set due to high network traffic or an intermittent fault condition. |
|---|
B7 CHECK FOR DTC (DIAGNOSTIC TROUBLE CODE) U0212 SET IN OTHER MODULES
Using a diagnostic scan tool, clear all Diagnostic Trouble Codes (DTCs).
Ignition OFF.
Ignition ON.
Wait 10 seconds.
Using a diagnostic scan tool, retrieve all Continuous Memory Diagnostic Trouble Codes
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.