MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2015–2017 source collection · Additional coverage

Electronic Engine Controls — Pinpoint Tests — Pinpoint Test C : U0164

Electronic Engine Controls - 3.7L Duratec (227kW & 301PS)

Source configuration appliesSource reference 6,353HTML edition
← Chapter contentsManual collection

No

The system is operating normally at this time. The DTC may have been set due to high network traffic or an intermittent fault condition.

C2 CHECK THE COMMUNICATION NETWORK

Using a diagnostic scan tool, perform a network test.

Does the FCIM module pass the network test?

Yes

GO to C3

C3 PERFORM FCIM (FRONT CONTROLS INTERFACE MODULE) MODULE SELF-TEST

Using a diagnostic scan tool, perform a FCIM module self-test.

Are any Diagnostic Trouble Codes (DTCs) recorded?

Yes

Without touchscreen, REFER to: Information and Entertainment System - Vehicles With: AM/FM/CD/SYNC. With touchscreen, REFER to: Information and Entertainment System - Vehicles With: Touchscreen Display.

No

GO to C4

C4 CHECK THE BCM (BODY CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)

Using a diagnostic scan tool, retrieve the BCM Diagnostic Trouble Codes (DTCs).

Are any Diagnostic Trouble Codes (DTCs) recorded?

No

GO to C5

C5 PERFORM THE PCM (POWERTRAIN CONTROL MODULE) SELF-TEST

Using a diagnostic scan tool, perform the PCM self-test.

Is DTC P0562 or DTC P0563 recorded?

No

GO to C6

Ford_Mustang_all_2015-2017.pdf · source reference 6353

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.