In drive, the manual valve directs line pressure to the No. 1 shuttle valve and clutch A, C and E regulator valves.
The No. 1 shuttle ball directs line pressure to the clutch B regulator valve.
Torque converter circuits:
When the TCC is released, the converter release regulator valve applies pressure to the torque converter through the CREL circuit to release the TCC.
CREL pressure exits the torque converter through the CAPLY circuit to the bypass clutch control regulator valve.
The bypass clutch control regulator valve directs the pressure from the CAPLY circuit back to the converter release regulator valve through the CAPLY EX circuit.
The converter release regulator valve directs the pressure from the CAPLY EX circuit to the drain back valve through the DBACK circuit.
Cooler and lubrication hydraulic circuits:
The lubrication control valve directs line pressure to the transmission fluid cooler or the thermal bypass valve through the COOLF circuit.
When the transmission fluid exits the transmission fluid cooler or thermal bypass valve, it provides lubrication to the transmission through the LUBE circuit.
Solenoid hydraulic circuits:
The solenoid pressure regulator valve supplies regulated line pressure to the shift, LPC and TCC solenoid through the SREG hydraulic circuit.
The LPC applies varying pressure to the main regulator valve through the VFS5 hydraulic circuit. The LPC solenoid regulates line pressure by controlling the position of the main regulator valve.
SSA supplies pressure to the clutch A regulator and latch valves to position the valves for forward clutch (A) application.
SSD supplies pressure to the solenoid multiplex valve through the VFS4 circuit.
SSE supplies pressure to the solenoid multiplex valve and the drive enable valve through the SS1 circuit to move the valves.
The position of the solenoid multiplex valve and the drive enable valve allows pressure from the
VFS4 circuit to be directed to the clutch E latch and regulator valves through the CLEC circuit to position the valves for overdrive clutch (E) application.
Clutch hydraulic circuits:
Regulated line pressure from the clutch A regulator valve is supplied to the forward clutch (A) to apply the clutch.
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.