MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2015–2017 source collection · Additional coverage

Diagnostic Trouble Code (DTC) Charts And Pinpoint Tests - 2.3L EcoBoost (201kW 273PS) — DTC Chart: PCM

Automatic Transmission - 6-Speed Automatic Transmission - 6R80

Source configuration appliesSource reference 8,734HTML edition
← Chapter contentsManual collection
DTCs are set. REPAIR as required. CLEAR the DTC. GO to Pinpoint Test A Transmission hydraulic Intermittent clutch on fault and and clutch systems may set with DTCs P2700, Transmission Control System (including non-electrical P2701, P2702, P2703 and/or P0701 Range/Performance shift solenoid faults, P2704. CLEAR the DTC. If main control valve DTC P0701 returns, REFER body and clutch(s)). to: Diagnosis By Symptom . INSPECT the PCM power and ground circuits for opens or short to ground. INSPECT the PCM connector for damaged or pushed-out terminals, Transmission Control System corrosion or loose wires. P0702 Battery Electrical CLEAR the DTC. RERUN the KOEO and (KOER self-test). If DTC P0702 returns, REFER to: Charging System - 2.3L EcoBoost (201kW/273PS) . Transmission Range Sensor P0705 TR sensor GO to Pinpoint Test C "A" Circuit (PRNDL Input) The TR sensor outputs a duty cycle indicating manual lever position. This DTC sets when the duty cycle is greater or Transmission Range Sensor less than the expected duty P0706 "A" Circuit TR sensor cycle by 50Hz or more. Range/Performance Engine may not crank. CLEAR the DTC. If DTC P0706 returns, GO to Pinpoint Test C Engine may not crank, Transmission Range Sensor CLEAR the DTC. If DTC P0707 TR sensor "A" Circuit Low P0707 returns, GO to Pinpoint Test C Engine may not crank, Transmission Range Sensor CLEAR the DTC. If DTC P0708 TR sensor "A" Circuit High P0708 returns, GO to Pinpoint Test C The TR sensor outputs a duty cycle indicating manual lever position. This DTC sets when Transmission Range Sensor the duty cycle is within range P0709 TR sensor "A" Circuit Intermittent but is in the dead band between the design position, and a in-range but invalid duty

Original table alignment retained · Scroll horizontally if needed

Ford_Mustang_all_2015-2017.pdf · source reference 8734

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.