MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2015–2017 source collection · Additional coverage

Diagnostic Trouble Code (DTC) Charts And Pinpoint Tests - 2.3L EcoBoost (201kW 273PS) — Pinpoint Tests — Pinpoint Test D : Tss (Turbine Shaft Speed) Sensor

Automatic Transmission - 6-Speed Automatic Transmission - 6R80

Source configuration appliesSource reference 8,757HTML edition
← Chapter contentsManual collection

D2 CHECK TSS SENSOR SIGNAL CIRCUIT FOR POWER

Ignition OFF.

Disconnect: Transmission Vehicle Harness C1575

Ignition ON.

Measure:

Positive Lead

Measurement / Action

Negative Lead

C1575-1

Ground

Is the voltage less than 4.8 volts?

Yes

GO to D3

No

GO to D6

D3 CHECK THE TSS SENSOR SIGNAL CIRCUIT FOR AN OPEN

Ignition OFF.

Disconnect: PCM C1551E

Inspect the connector for damaged or pushed out terminals, corrosion, loose wires and missing or damaged seals.

Measure:

Positive Lead

Measurement / Action

Negative Lead

C1575-1

C1551E-27

Is the resistance less than 3 ohms?

Yes

GO to D4

No

INSPECT and REPAIR transmission vehicle harness TSS sensor signal circuit for an open. If an open circuit is not found, INSTALL a new PCM, REFER to: Powertrain Control Module (PCM) . PERFORM the Solenoid Body Strategy Data Download procedure. REFER to: Transmission Strategy Download .

D4 CHECK THE TSS SENSOR SIGNAL CIRCUIT FOR A SHORT TO GROUND

Measure:

Positive Lead Measurement / Action Negative Lead

Ford_Mustang_all_2015-2017.pdf · source reference 8757

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.