Positive Lead | Measurement / Action | Negative Lead |
C1575-4 | Ground |
Is the voltage greater than 4.8 volts?
Yes | GO to C5 |
|---|
No | INSPECT and REPAIR the transmission vehicle harness for an open. If an open circuit is not found, INSTALL a new PCM, REFER to: Powertrain Control Module (PCM) . PERFORM the Solenoid Body Strategy Data Download procedure. REFER to: Transmission Strategy Download . |
|---|
C5 CHECK TR SENSOR GROUND CIRCUIT
Measure:
Positive Lead | Measurement / Action | Negative Lead |
C1575-4 | C1575-11 |
Is the voltage greater than 4.8 volts?
Yes | GO to C6 |
|---|
No | INSPECT and REPAIR transmission vehicle harness circuit for an open. If an open circuit is not found, INSTALL a new PCM, REFER to: Powertrain Control Module (PCM) . PERFORM the Solenoid Body Strategy Data Download procedure. REFER to: Transmission Strategy Download . |
|---|
C6 CHECK TR SENSOR TO MANUAL VALVE
Drain the transmission fluid and remove the transmission fluid pan. REFER to: Transmission Fluid Pan, Gasket and Filter .
Check the connection between the TR sensor and the manual control valve. REFER to: Transmission .
Inspect the molded leadframe for metallic contamination, REFER to: Shift Solenoids (SS) .
Is the TR sensor connected to the manual control valve shaft?
Is the TR sensor connected to the manual control valve shaft?
Yes | INSTALL a new TR sensor. REFER to: Shift Solenoids (SS) . |
|---|
No | CONNECT the TR sensor to the manual control valve, REFER to: Shift Solenoids (SS) . CLEAN any debris from the molded leadframe. RUN the KOEO self-test. If DTCs return, |
|---|
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.