MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2015–2017 source collection · Additional coverage

Diagnostic Trouble Code (DTC) Charts And Pinpoint Tests - 3.7L Duratec (227kW 301PS) — Pinpoint Tests — Pinpoint Test E : Oss (Output Shaft Speed) Sensor

Automatic Transmission - 6-Speed Automatic Transmission - 6R80

Source configuration appliesSource reference 8,791HTML edition
← Chapter contentsManual collection

Disconnect: PCM C1575

Ignition ON.

Measure:

Positive Lead

Measurement / Action

Negative Lead

C1575-15

Ground

Is the voltage less than 4.8 volts?

Yes

GO to E3

No

GO to E6

E3 CHECK THE OSS SENSOR SIGNAL CIRCUIT FOR AN OPEN

Ignition OFF.

Disconnect: PCM C1381E

Inspect the connector for damaged or pushed out terminals, corrosion, loose wires and missing or damaged seals.

Measure:

Positive Lead

Measurement / Action

Negative Lead

C1575-15

C1381E-26

Is the resistance less than 3 ohms?

Yes

GO to E4

No

INSPECT and REPAIR transmission vehicle harness OSS sensor signal circuit for an open. If an open circuit is not found, INSTALL a new PCM, REFER to: Powertrain Control Module (PCM) . PERFORM the Solenoid Body Strategy Data Download procedure. REFER to: Transmission Strategy Download .

E4 CHECK THE OSS SENSOR SIGNAL CIRCUIT FOR A SHORT TO GROUND

Measure:

Positive Lead

Measurement / Action

Negative Lead

C1575-15

Ground

Is the resistance greater than 10, 000 ohms?

Ford_Mustang_all_2015-2017.pdf · source reference 8791

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.