Self Test Range self-test. DTC P1744 is a non-electrical DTC. CLEAR Torque Converter Clutch P1744 TCC the DTC. If DTC P1744 Solenoid Circuit Performance returns, REFER to: Diagnosis By Symptom . This DTC may set when there is a mechanical/hydraulic concern with the direct or forward clutch pack, possibly deformed clutch plates or a rolled clutch seal allowing the direct clutch or the forward clutch to mechanically or hydraulically apply in neutral. PLACE the transmission in Unable To Fully Engage Direct or forward clutch neutral with the engine P177F Neutral pack running to see if there is any creep torque, this fault causes the transmission to partially engage forward gear in neutral. This DTC may set with P0752, P0757, P0762, and/or P0767. CLEAR the DTC. If the DTC returns, check the transmission for internal failure. REFER to: Transmission . Transmission Control Switch CLEAR the DTC. If DTC P1780 (O/D Cancel) Circuit Out of TCS P1780 returns, REFER to: Self-Test Range External Controls . CLEAR the DTC. If DTC P1783 returns, determine if this DTC was set in conjunction with any Transmission Over P1783 Transmission transmission fluid temperature Temperature Condition sensor circuit DTCs and RESOLVE them first, otherwise REFER to: Transmission Cooling . CLEAR the DTC. TEST system for normal operation. Reverse Lamp Control P1910 Reverse lamps If DTC P1910 returns, Circuit/Open REFER to: Reversing Lamps . The engine may not crank. DTC P0706, P0707 and/or P1921 Transmission Range Signal TR sensor P0708 may set. CLEAR the DTC. If DTC P1921 returns,
Original table alignment retained · Scroll horizontally if needed
Ford_Mustang_all_2015-2017.pdf · source reference 8805
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.