2015–2017 source collection · Additional coverage

Diagnostic Trouble Code (DTC) Charts And Pinpoint Tests - 5.0L 32v Ti-VCT — Pinpoint Tests — Pinpoint Test A : Transmission Control Solenoids

Automatic Transmission - 6-Speed Automatic Transmission - 6R80

Source configuration appliesSource reference 8,810HTML edition

Inspect the connector for damaged or pushed out terminals, corrosion, loose wires and missing or damaged seals.

Measure the resistance of the solenoid control circuits using the following chart.

Positive Lead	Measurement / Action	Negative Lead
C175E-75		C1575-9
C175E-74		C1575-14
C175E-73		C1575-13
C175E-72		C1575-10
C175E-77		C1575-8
C175E-15		C1575-16
C175E-14		C1575-3

Is the resistance less than 3 ohms on each circuit?

Yes	GO to A5

No	REPAIR the transmission vehicle harness circuit. CLEAR the DTCs.

A5 CHECK SOLENOID CONTROL CIRCUITS FOR A SHORT TO GROUND

Measure the resistance between the transmission vehicle harness C1575 , harness side and ground using the following chart.

Positive Lead	Measurement / Action	Negative Lead
C1575-7		Ground
C1575-9		Ground
C1575-14		Ground
C1575-13		Ground
C1575-10		Ground
C1575-8		Ground
C1575-16		Ground
C1575-3		Ground

Are the resistances greater than 10, 000 ohms?

Yes	GO to A6

Ford_Mustang_all_2015-2017.pdf · source reference 8810

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.