2015–2017 source collection · Additional coverage

Diagnostic Trouble Code (DTC) Charts And Pinpoint Tests - 5.0L 32v Ti-VCT — Pinpoint Tests — Pinpoint Test B : Tft (Transmission Fluid Temperature) Sensor

Automatic Transmission - 6-Speed Automatic Transmission - 6R80

Source configuration appliesSource reference 8,813HTML edition

← Chapter contents Manual collection

detection and diagnostics.

Possible Sources

Connectors damaged or pushed-out terminals, corrosion, loose wires and missing or damaged seals

TFT sensor

Transmission internal wiring harness frame

PCM

DIAGNOSIS AND TESTING > DIAGNOSTIC TROUBLE CODE (DTC) CHARTS AND

PINPOINT TESTS - 5.0L 32V TI-VCT > PINPOINT TESTS > PINPOINT TEST B : TFT

(TRANSMISSION FLUID TEMPERATURE) SENSOR > PINPOINT TEST B : TFT

(TRANSMISSION FLUID TEMPERATURE) SENSOR

B1 CHECK TFT INPUT SIGNAL

Ignition OFF.

Disconnect: Transmission Vehicle Harness C1575 .

Inspect the connector for damaged or pushed out terminals, corrosion, loose wires and missing or damaged seals.

Connect the diagnostic tool.

Ignition ON.

Enter the following mode on the diagnostic scan tool: TFT PIDs TFT and TFTV.

Does the TFT PID display -40 °C (-40 °F) and the TFTV PID display 4.96 to 5.10 volts? ?

Yes	GO to B2

No	REPAIR the circuit.

B2 CHECK TFT SIGNAL INPUT CIRCUIT FOR VOLTAGE

Measure.

Positive Lead	Measurement / Action	Negative Lead
C1575-6		Ground

Is the voltage between 4.8 and 5.1 volts?

Ford_Mustang_all_2015-2017.pdf · source reference 8813

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.