MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Body & Paint

Front Seats

501-10A Front Seats

2016 MustangReference 1,037 / 6,619HTML edition
← Chapter contentsProcedure contents

DTC Fault Trigger Conditions

DTC

Description

Fault Trigger Conditions

B19A2 Passenger Seat Back Blower Speed

Short to Battery

If the passenger seat backrest blower speed circuit is shorted to voltage, the SCME shuts down the passenger seat system and sets this DTC.

Possible Causes

Wiring, terminals or connectors Backrest blower motor SCME

PINPOINT TEST S : DTC B19A2

WARNING: Incorrect repair techniques or actions can cause an accidental Supplemental Restraint System (SRS) deployment. Never compromise or depart from these instructions. Failure to precisely follow all instructions could result in serious personal injury from an accidental deployment.

S1 CHECK BACKREST BLOWER MOTOR SPEED CONTROL CIRCUIT FOR A SHORT TO VOLTAGE

REFER to: Supplemental Restraint System (SRS) Depowering (501-20B Supplemental Restraint System, General Procedures). Disconnect: Passenger Side Airbag In-line C219. Disconnect: SCME C3265C. Ignition ON. Measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C3265C-4

Ground

Is any voltage present?

Yes

GO to S2

No

GO to S3

S2 CHECK BACKREST BLOWER MOTOR SPEED CONTROL CIRCUIT FOR A SHORT TO VOLTAGE WITH THE CIRCUIT ISOLATED

Ignition OFF. Disconnect: Passenger Seat Backrest Blower Motor C3039. Ignition ON. Measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C3265C-4

Ground

Is any voltage present?

Yes

REPAIR the circuit. GO to S6

No

GO to S3

S3 CHECK BACKREST BLOWER MOTOR SPEED CONTROL AND BLOWER OUTPUT CIRCUITS FOR A SHORT TOGETHER

Ignition OFF. Disconnect: Passenger Seat Backrest Blower Motor C3039. Measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C3265C-4

C3265C-8

Is the resistance greater than 10,000 ohms?

Yes

GO to S4

No

REPAIR the circuits. GO to S6

Source reference 1037

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.