PDM DTC Chart
DTC | Description | Action |
|---|---|---|
U2002:24 | Switch: Signal Stuck High | GO to Pinpoint Test D |
All other Diagnostic Trouble Codes (DTCs) | - | REFER to: Locks, Latches and Entry Systems (501-14 Handles, Locks, Latches and Entry Systems, Diagnosis and Testing). |
Symptom Chart(s)
Symptom Chart: Glass, Frames and Mechanisms
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Symptom Chart
Condition | Possible Sources | Actions |
|---|---|---|
Both front door power windows are inoperative from the master window control switch only - with memory driver seat | Wiring, terminals or connectors Master window control switch DDM | DIAGNOSE any related DDM Diagnostic Trouble Codes (DTCs) first. REFER to the DDM DTC Chart in this section. If there are no related Diagnostic Trouble Codes (DTCs) present, INSTALL a new master window control switch. REFER to: Front Door Window Control Switch (501-11 Glass, Frames and Mechanisms, Removal and Installation). |
Both front door power windows are inoperative - without memory driver seat | Fuse Wiring, terminals or connectors | VERIFY the BCM fuse 23 (10A) is OK. If OK, REPAIR circuit CBP23 (BN/YE) for an open. If not OK, REFER to the Wiring Diagrams manual to identify the possible causes of the circuit short. |
The LH front power window is inoperative/does not operate correctly - without memory driver seat | Refer to the Pinpoint Test | GO to Pinpoint Test A |
The LH front power window is inoperative/does not operate correctly - with memory driver seat | Refer to the Pinpoint Test | GO to Pinpoint Test B |
The RH front power window is inoperative/does not operate correctly - without memory driver seat | Refer to the Pinpoint Test | GO to Pinpoint Test C |
The RH front power window is inoperative/does not operate correctly - with memory driver seat | Refer to the Pinpoint Test | GO to Pinpoint Test D |
Both rear quarter windows are inoperative from the window control switch | Refer to the Pinpoint Test | GO to Pinpoint Test E |
The LH rear quarter window is inoperative/does not operate correctly | Refer to the Pinpoint Test | GO to Pinpoint Test F |
The RH rear quarter window is inoperative/does not operate correctly | Refer to the Pinpoint Test | GO to Pinpoint Test G |
The one-touch up/down feature is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test H |
The global open function is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test I |
The short drop window feature does not operate correctly | Refer to the Pinpoint Test | GO to Pinpoint Test J |
The defrost system is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test K |
The defrost system does not shut off automatically | Refer to the Pinpoint Test | GO to Pinpoint Test L |
The defrost system does not respond to voice command only | Refer to the Pinpoint Test | VERIFY the rear window defrost operation using the instrument panel rear window defrost switch. If the rear window defrost is still inoperative, GO to Pinpoint Test K If the rear window defrost operates, Refer to the appropriate section in Group 415 for the procedure. |
The defrost system does not respond to touchscreen command only | Refer to the Pinpoint Test | VERIFY the rear window defrost operation using the instrument panel rear window defrost switch. If the rear window defrost is still inoperative, GO to Pinpoint Test K If the rear window defrost operates, Refer to the appropriate section in Group 415 for the procedure. |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.