MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Body & Paint

Glass, Frames and Mechanisms

501-11 Glass, Frames and Mechanisms

2016 MustangReference 1,209 / 6,619HTML edition
← Chapter contentsProcedure contents

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C535-4

C501A-17

For convertible, measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C504-11

C501A-17

Is the resistance less than 3 ohms?

Yes

GO to B16

No

REPAIR the circuit.

B5 CHECK THE MASTER WINDOW CONTROL SWITCH LIN (LOCAL INTERCONNECT NETWORK) CIRCUIT FOR A SHORT TO VOLTAGE

Disconnect: DDM C501A. Ignition ON. For coupe, measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C535-3

Ground

For convertible, measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C504-1

Ground

Is any voltage present?

Yes

REPAIR the circuit.

No

GO to B6

B6 CHECK THE MASTER WINDOW CONTROL SWITCH LIN (LOCAL INTERCONNECT NETWORK) CIRCUIT FOR A SHORT TO GROUND

Ignition OFF. For coupe, measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C535-3

Ground

For convertible, measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C504-1

Ground

Is the resistance greater than 10,000 ohms?

Yes

GO to B7

No

REPAIR the circuit.

B7 CHECK THE MASTER WINDOW CONTROL SWITCH LIN (LOCAL INTERCONNECT NETWORK) CIRCUIT FOR AN OPEN

For coupe, measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C535-3

C501A-5

Source reference 1209

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.