Does the RH door window operate from at least one window control switch?
Yes | If the RH door window operates only from the passenger door window control switch, INSTALL a new master window control switch. REFER to: Front Door Window Control Switch (501-11 Glass, Frames and Mechanisms, Removal and Installation). If the RH door window operates only from the master window control switch, GO to D5 |
|---|---|
No | GO to D9 |
D5 CHECK THE PASSENGER DOOR WINDOW CONTROL SWITCH RETURN CIRCUIT
Ignition OFF. Disconnect: Passenger Door Window Control Switch C624. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C624-1 | Ground |
Is the resistance less than 3 ohms?
Yes | GO to D7 |
|---|---|
No | GO to D6 |
D6 CHECK THE PASSENGER DOOR WINDOW CONTROL SWITCH RETURN CIRCUIT FOR AN OPEN
Disconnect: PDM C652A. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C624-1 | C652A-17 |
Is the resistance less than 3 ohms?
Yes | GO to D16 |
|---|---|
No | REPAIR the circuit. |
D7 CHECK THE WINDOW CONTROL SWITCH UP/DOWN CIRCUITS
Disconnect: PDM C652A. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C624-3 | C652A-9 | |
C624-2 | C652A-8 |
Are the resistances less than 3 ohms?
Yes | GO to D8 |
|---|---|
No | REPAIR the circuit in question. |
D8 CHECK THE PASSENGER DOOR WINDOW CONTROL SWITCH
Carry out the passenger door window control switch component test. Refer to Wiring Diagrams Cell 149 for schematic and connector information.
Did the passenger door window control switch pass the component test?
Yes | GO to D16 |
|---|---|
No | INSTALL a new passenger door window control switch. REFER to: Front Door Window Control Switch (501-11 Glass, Frames and Mechanisms, Removal and Installation). |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.