Fixed Glass
Base Part Number: 29700
Special Tool(s) / General Equipment
Glass Cut-Out Wire
Power Caulk Gun
Power Fixed Glass Removal Tool
Cold Knife
Knife
Vacuum Cleaner
Materials
Name | Specification |
|---|---|
Betaseal™ Express Dow Urethane Adhesive | - |
Sika Tack ASAP Urethane Adhesive | - |
Dow Urethane One Step Glass Primer Betaprime™ 5500/5500A/5500SA | - |
Sika Urethane Metal and Glass Primer Sika 206 G+P | - |
Motorcraft® Ultra-Clear Spray Glass Cleaner (U.S.) ZC-23 (U.S.) | ESR-M14P5-A |
Bare Metal Etch Primer BETAPRIME 5201 | - |
Body Primer BETASEAL™ 43538 | - |
Repair
1. NOTE: Some interior trim, exterior trim and/or components may require removal based on the tools and removal method used.
NOTE: In some instances repair methods may be combined to achieve the best results.
Choose the best repair method for the type of glass being replaced.
1. Cold knife method – uses the cold knife to cut the urethane from the outside of a vehicle provided the blade can reach the bead. Use the General Equipment: Cold Knife
2. Power tool method – uses various power tools from inside the vehicle using a cutting or paddle type blade. Use the General Equipment: Power Fixed Glass Removal Tool
3. Piano wire method – uses the piano wire to cut the urethane from inside and outside of a vehicle using an assistant. Use the General Equipment: Glass Cut-Out Wire
2. When using the cold knife method, apply tape to protect the perimeter of the window opening from paint damage. Multiple layers of tape may be required.
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.