MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE
Saved 0

2016 workshop · Service Information

Symbols Glossary

100-00 General Information

2016 MustangReference 22 / 6,619HTML edition
← Chapter contentsProcedure contents

7

—

Replaced by symbol 15

8

—

Replaced by symbol 16

9

—

Set the selector lever to the park (P) position

10

—

Set the selector lever to the reverse (R) position

11

—

Set the selector lever to the neutral (N) position

12

—

Set the selector lever to the drive (D) position

13

—

Set the selector lever to the drive (S) position

14

—

Set the selector lever to the drive (M) position

15

—

Set the selector lever to the drive (-) position

16

—

Set the selector lever to the drive (+) position

17

—

Set the gearshift lever to the neutral (N) position

18

—

Further gearshift lever positions that may appear in illustrations

Screwdriver symbols

The screwdriver symbols are used to show which screwdriver bit is recommended to carry out a procedure step.

Source reference 22

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.