Rear Wheelhouse Outer
Special Tool(s) / General Equipment
Resistance Spotwelding Equipment
Air Body Saw
MIG/MAG Welding Equipment
Locking Pliers
Materials
Name | Specification |
|---|---|
Seam Sealer TA-2-B | - |
Removal
1. If required, dimensionally restore vehicle to pre-accident condition. Refer to: Body and Frame (501-26 Body Repairs - Vehicle Specific Information and Tolerance Checks, Description and Operation).
2. Remove the following items:
1. Refer to: Quarter Panel - Coupe (501-30 Rear End Sheet Metal Repairs, Removal and Installation).
2. Refer to: Quarter Panel - Convertible (501-30 Rear End Sheet Metal Repairs, Removal and Installation).
3. Reposition the carpeting and the wiring harness away from the working area.
NOTE: Cutline shown as a general guideline, depending on extent of the damage. LH side shown, RH similar.
4. NOTE: Coupe shown, convertible similar.
Mark a cutline on the wheelhouse panel.
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.