MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Suspension

Suspension System

204-00 Suspension System - General Information

2016 MustangReference 2,407 / 6,619HTML edition
← Chapter contentsProcedure contents

Condition

Possible Sources

Actions

Rear suspension noise — a squeak, creak or rattle noise. Occurs mostly over bumps or rough roads due to the suspension moving in an up/down motion.

Loose or damaged rear shock absorber(s) or shock absorber bushing(s)

INSPECT the rear shock absorber(s) or shock absorber bushing(s). INSTALL new components as necessary. REFER to: Rear Shock Absorber (204-02 Rear Suspension, Removal and Installation).

Damaged spring(s) or spring mount(s)

INSPECT the rear spring(s) and spring mount(s). REPLACE damaged components as necessary. REFER to: Spring (204-02 Rear Suspension, Removal and Installation).

Worn or damaged stabilizer bar bushing(s) or link(s)

INSPECT the stabilizer bar bushing(s) or link(s). REPLACE damaged or worn components as necessary. REFER to: Rear Stabilizer Bar Bushing (204-02 Rear Suspension, Removal and Installation). or REFER to: Rear Stabilizer Bar Link (204-02 Rear Suspension, Removal and Installation).

Worn or damaged lower control arms, toe link ball joints or cross-axis joints

INSPECT for worn or damaged lower control arms, toe link ball joints or cross-axis joints. REPLACE damaged or worn components as necessary.

Noise from front suspension when turning — crunch or ratcheting noise. Occurs as a result of the suspension twisting and flexing.

Strut top nut

INSPECT and TIGHTEN to specification. REFER to: Front Strut and Spring Assembly (204-01 Front Suspension, Removal and Installation).

Worn or damaged front strut bearing(s)

INSPECT for worn or damaged strut bearing. INSTALL new components as necessary. REFER to: Front Strut and Spring Assembly (204-01 Front Suspension, Removal and Installation).

Coil Spring

INSPECT springs. REPLACE as necessary. REFER to: Front Strut and Spring Assembly (204-01 Front Suspension, Removal and Installation).

Strut brackets or seat(s)

INSPECT strut brackets or seat(s). REPAIR as necessary.

Stabilizer bar

INSPECT the stabilizer bar. REPAIR or REPLACE as necessary. REFER to: Front Stabilizer Bar (204-01 Front Suspension, Removal and Installation).

Source reference 2407

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.