Condition Possible Sources Actions Steering gear INSPECT the steering gear. REFER to: Power Steering (211-02 Power Steering, Diagnosis and Testing). Tie rod ends INSPECT tie rod ends. INSTALL new components as necessary. REFER to: Tie Rod End (211-02 Power Steering, Removal and Installation). Hub INSPECT hub(s). REPAIR or REPLACE as necessary. REFER to: Front Wheel Bearing and Wheel Hub - Vehicles With: SVT Performance Package (204-01 Front Suspension, Removal and Installation). Lower control arm / ball joint INSPECT ball joints. INSTALL new control arm(s) as necessary. REFER to: Front Lower Arm (204-01 Front Suspension, Removal and Installation). or REFER to: Rear Lower Arm (204-01 Front Suspension, Removal and Installation). Noise from front suspension when turning Steering stops Normal condition. No action — Crunch clunk or grunt noise from the required. front suspension occurring when turning to full left or right stop. Noise while braking — Noises occurring Front brake caliper INSPECT the front brake during this condition result from rearward caliper(s). and downward force applied to the REFER to: Brake System (206-00 suspension and subframe such as Brake System - General rearward force applied to the lower Information, Diagnosis and control arm. Testing). Hub INSPECT hub(s). REPAIR or REPLACE as necessary. REFER to: Front Wheel Bearing and Wheel Hub - Vehicles With: SVT Performance Package (204-01 Front Suspension, Removal and Installation). Lower control arm / ball joint INSPECT ball joints. INSTALL new control arm(s) as necessary. REFER to: Front Lower Arm (204-01 Front Suspension, Removal and Installation). or REFER to: Rear Lower Arm (204-01 Front Suspension, Removal and Installation). Powertrain mounts INSPECT the powertrain mounts. REFER to: Engine Mount LH (303-01B Engine - 3.7L Duratec (227kW/301PS), Removal and Installation). REFER to: Engine Mount RH (303-01B Engine - 3.7L Duratec (227kW/301PS), Removal and Installation).
Original table alignment retained · Scroll horizontally if needed
Source reference 2408
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.