MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Suspension

Wheels and Tires

204-04A Wheels and Tires

2016 MustangReference 2,542 / 6,619HTML edition
← Chapter contentsProcedure contents

the diagonal wear pattern may need to be measured.

Symptom Chart(s)

Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).

WARNING: Vehicle may have multiple drive wheels. Do not use engine to power the driveline unless all drive wheels are elevated off the ground. Drive wheels in contact with ground could cause unexpected vehicle movement. Failure to follow this instruction may result in serious personal injury.

Symptom Chart: Tire Wear

Condition

Possible Sources

Actions

Inner edge/shoulder wear

Excessive toe out and/or negative camber Incorrect wheel and tire assembly rotation intervals High-speed cornering

GO to Pinpoint Test A

Outer edge/shoulder wear

Excessive toe in and/or positive camber Incorrect wheel and tire assembly rotation intervals High-speed cornering

GO to Pinpoint Test B

Heel/toe wear

Excessive toe in/out Incorrect wheel and tire assembly rotation intervals

ROTATE the wheel and tire assemblies. CHECK the alignment, ADJUST as necessary.

Diagonal wear

Excessive toe in/out Incorrect tire rotation intervals

GO to Pinpoint Test C

Loose, worn or damaged suspension components

REFER to: Suspension System (204-00 Suspension System - General Information, Diagnosis and Testing).

Symptom Chart: NVH

Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).

NVH symptoms should be identified using the diagnostic tools that are available. For a list of these tools, an explanation of their uses and a glossary of common terms, REFER to: Noise, Vibration and Harshness (NVH) (100-04 Noise, Vibration and Harshness, Description and Operation). Since it is possible any one of multiple systems may be the cause of a symptom, it may be necessary to use a process of elimination type of diagnostic approach to pinpoint the responsible system. If this is not the causal system for the symptom, REFER to: Noise, Vibration and Harshness (NVH) (100-04 Noise, Vibration and Harshness, Description and Operation). for the next likely system and continue diagnosis.

Condition

Possible Sources

Actions

Source reference 2542

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.