MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Brake System

Brake System

206-00 Brake System - General Information

2016 MustangReference 2,779 / 6,619HTML edition
← Chapter contentsProcedure contents

206-00 Brake System - General Information 2016 Mustang

Diagnosis and Testing Procedure revision date: 07/27/2015

Brake System

Symptom Chart(s)

Symptom Chart: Brake System

Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).

Condition

Possible Sources

Actions

The red brake warning indicator and the yellow ABS warning indicator are illuminated

Diagnostic Trouble Codes (DTCs) in the ABS

CHECK for ABS diagnostic trouble codes (DTCs). REFER to: Anti-Lock Brake System (ABS) and Stability Control (206-09 Anti-Lock Brake System (ABS) and Stability Control, Diagnosis and Testing).

The red brake warning indicator is always/never on

Brake fluid level switch Parking brake switch Wiring, terminals or connectors IPC BCM

REFER to: Instrumentation, Message Center and Warning Chimes (413-01 Instrumentation, Message Center and Warning Chimes, Diagnosis and Testing).

Vehicle pulls or drifts during braking

Brake calipers and/or guide pins Brake flexible hose Brake pads Brake discs

INSPECT the brake system components. INSTALL new components as necessary.

Tires

REFER to: Wheels and Tires (204-04A Wheels and Tires, Diagnosis and Testing).

Suspension component(s) and/or wheel alignment

REFER to: Suspension System (204-00 Suspension System - General Information, Diagnosis and Testing).

Brake pedal goes down fast or eases down slowly

Brake fluid leaks and/or air in the system

INSPECT the system for leaks. REPAIR as necessary. BLEED the system. REFER to: Brake System Pressure Bleeding (206-00 Brake System - General Information, General Procedures).

Brake master cylinder

CARRY OUT the Brake Master Cylinder - Bypass Condition Component Test.

HCU

REFER to: Anti-Lock Brake System (ABS) and Stability Control (206-09 Anti-Lock Brake System (ABS) and Stability Control, Diagnosis and Testing).

Brake pedal

INSPECT the brake pedal simulator spring, cam and interface-to-booster. INSTALL a new brake pedal and bracket as necessary.

Source reference 2779

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.