Is there a vibration/shudder?
Yes | GO to A7 |
|---|---|
No | GO to A5 |
A5 CHECK THE FRONT SUSPENSION
Check the front suspension.
Are all the suspension components in satisfactory condition?
Yes | GO to A6 |
|---|---|
No | REPAIR or INSTALL new components as necessary. TEST the system for normal operation. |
A6 CHECK THE FRONT BRAKE DISCS
Inspect the front brake discs. MACHINE or INSTALL new brake discs as necessary. REFER to: Brake Disc Machining (206-00 Brake System - General Information, General Procedures). REFER to: Brake Disc (206-03 Front Disc Brake, Removal and Installation). REFER to: Brake Disc - Vehicles With: SVT Performance Package (206-03 Front Disc Brake, Removal and Installation). Road test the vehicle.
Is the vibration/shudder present?
Yes | GO to A7 |
|---|---|
No | The concern has been repaired. |
A7 CHECK THE REAR SUSPENSION
Check the rear suspension.
Are all the suspension components in satisfactory condition?
Yes | INSPECT the rear brake discs. MACHINE or INSTALL new brake discs as necessary. REFER to: Brake Disc Machining (206-00 Brake System - General Information, General Procedures). REFER to: Brake Disc (206-04 Rear Disc Brake, Removal and Installation). REFER to: Brake Disc - Vehicles With: SVT Performance Package (206-04 Rear Disc Brake, Removal and Installation). |
|---|---|
No | REPAIR or INSTALL new components as necessary. TEST the system for normal operation. |
Component Test- Brake Booster
1. Disconnect the brake booster vacuum sensor/check valve from the brake booster and connect a suitable vacuum/pressure tester to the booster side of the vacuum sensor/check valve.
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.